top of page
aluminium-furnace.jpg

FERRO MOLYBDENUM

Our Ferro Molybdenum has the following chemical analysis:

Standard Material
%
Mo
60% min or 65% min
Cu
0.5% max
Si
1.5% max
S
0.1% max
P
0.1% max
C
0.05% max

Packing:

  • Drums on a pallet

  • 1mt bags

  • 25kg bags

 

Sizing:

  • 1-5mm

  • 5-50mm

 

About Ferro Molybdenum

Ferro Molybdenum is an alloy formed by combining Iron and Molybdenum. Ferro Molybdenum is a hardening agent and is found in many alloy steels that are heat-treatable. Molybdenum prevents corrosion in stainless steels, and when mixed with Iron, the Molybdenum also strengthens and hardens into austenite. Ferro Molybdenum comes in many grades, although predominantly it is produced in two grades (US grade and European grade) where the content of pure Molybdenum is between 60% and 75%.

Key Properties of Ferro Molybdenum

Ferro Molybdenum is an additive to the production process of amorphous metals and will impart several desirable properties into the new alloy. One of the primary benefits of adding Ferro Molybdenum to an alloy is its hardening properties that makes steel extremely strong and at the same time weldable, as Molybdenum is one of the top 5 melting-point metals. Additionally, the adding of Ferro Molybdenum to an alloy can increase corrosion resistance. Properties of Ferro Molybdenum make it suitable for a variety of protective films over other metals.

Production of Ferro Molybdenum

The most basic definition of the Ferro Molybdenum production process would be that the Molybdenum is first mined and then transformed into Molybdenum (VI) Oxide MoO₃. That oxide is mixed with Iron Oxide and Aluminium and then reduced in an aluminothermy reaction. Electron-beam melting then purifies the Ferro Molybdenum, or the product can be packaged as-is. Typically the resulting alloy will be produced as either small briquettes or as a finer powder. Ferro Molybdenum is usually supplied in either bags or steel drums for shipping.

 

Uses

The largest practical applications of Ferro Molybdenum are its use in ferrous alloys, and depending on the molybdenum content range, it is suited for machine tools and equipment, military hardware, refinery tubing, load-bearing parts and rotary drills. Ferro Molybdenum is also used in cars, trucks, locomotives and ships. In addition, Ferro Molybdenum is used in stainless and heat-resisting steels that are employed by synthetic fuel and chemical plants, heat exchangers, power generators, oil-refining equipment, pumps, turbine tubing, ship propellers, plastics and inside acid storage containers. Tool steels, with a high percentage range of Ferro Molybdenum, are used in high-speed machining parts, cold work tools, drill bits, screwdrivers, dies, chisels, heavy castings, ball and rolling mills, rolls, cylinder blocks, piston rings and large drill bits.

moulten-aluminium.jpg
bottom of page